Volume 3, Issue 1, June 2019, Page: 12-16
Real-time Display System to Monitor Plasma Shape and Position During the Discharge of the Tokamak
Md Mahbub Alam, Institute of Computer Science, Bangladesh Atomic Energy Commission, Agargaon, Dhaka, Bangladesh
Md Dulal Hossain, Institute of Computer Science, Bangladesh Atomic Energy Commission, Agargaon, Dhaka, Bangladesh
Md Shafiul Alam Chowdhury, Department of Computer Science and Engineering, Uttara University, Uttara, Dhaka, Bangladesh
Received: Jun. 6, 2019;       Accepted: Jul. 10, 2019;       Published: Jul. 24, 2019
DOI: 10.11648/j.ijem.20190301.13      View  148      Downloads  12
Abstract
A novel, efficient and precise real-time display system to monitor the plasma shape and position during the discharge of the tokamak has been offered in this study for the observation of the continuous behavior of the plasma that is produced inside the vacuum vessel. The observed behavior of the plasma can provide indications for the control and operation of the tokamak to achieve long time discharge. The display system can display the plasma cross-sectional view of the last closed flux surface (LCFS) with the position of the vacuum vessel wall and the X-points position with the setting of the divertor plates at a big screen in real-time. The display system offers not only the visual image of the plasma but also time evolution graphs of various plasma parameters such as the plasma current (IP), poloidal field coils currents (IPF), emission of Hα, transport of the oxygen impurity, major radius (R), minor radius (a), plasma elongation (κ) and triangularity (δ) in real-time. For the remote participation to the experiments, the display system has a subsystem that can record the entire display frame and the time evolution graphs of the various plasma parameters as video files. The recorded video files are accessible through online by the remote participants during the operation of the tokamak. In addition, the display system has an emergency safety notification system that can identify the critical condition of the tokamak during its operation and can notify the occurrences of any critical or abnormal situations by generating an alarm. The overall display system and its subsystems have been designed and integrated with the real-time hardware equipment of the National Instruments Corporation (NI) and the entire data acquisition and computational systems have been developed by the LabVIEW programming Language.
Keywords
Display System, Long Time Discharge, Plasma Shape, Position, Real-time, Tokamak, Safety Notification System
To cite this article
Md Mahbub Alam, Md Dulal Hossain, Md Shafiul Alam Chowdhury, Real-time Display System to Monitor Plasma Shape and Position During the Discharge of the Tokamak, International Journal of Engineering Management. Vol. 3, No. 1, 2019, pp. 12-16. doi: 10.11648/j.ijem.20190301.13
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Anand, Himank, et al., “Plasma shape and position controller design for advance plasma configurations in TCV,” APS Meeting Abstracts. Nov. 2015.
[2]
S. Hara, K. Takeuchi, M. Abe and M. Otsuka, “Development of a real time visualization system for the shape of a tokamak plasma cross section,” Review of scientific instruments, vol. 65 (11), pp. 3434-8, Nov. 1994.
[3]
https://www.iter.org/newsline/128/247
[4]
Zhang, X., Hu, et al., “The development of data acquisition and remote real-time display system for EAST NBI,” Journal of Fusion Energy, Vol. 32 (5), pp. 566-569, 2013.
[5]
Shu, Shuangbao, et al., “Plasma image edge detection based on the visible camera in the EAST device,” SpringerPlus, vol. 5 (1), p. 2050, 2016.
[6]
Ellis, J., et al., "A real time plasma boundary determination and display system using transputers," Proceedings of the 18th Symposium on Fusion Technology, pp. 743-746. 1994.
[7]
Puig Sitjes, A., et al., “Wendelstein 7-x near real-time image diagnostic system for plasma-facing components protection,” Fusion Science and Technology, vol. 74.1-2, pp. 116-124, 2018.
[8]
Hasegawa, Makoto, et al., “Modification of plasma control system and hot-wall temperature control system for long-duration plasma sustainment in QUEST,” Fusion Engineering and Design, vol. 129, pp. 202-206, 2018.
[9]
Hartfuss, H. J., R. König, and A. Werner, “Diagnostics for steady state plasmas,” Plasma physics and controlled fusion, vol. 48 (10), p. R83, 2006.
[10]
Rodríguez, Alfonso, et al., “Fpga-based high-performance embedded systems for adaptive edge computing in cyber-physical systems: The artico3 framework,” Sensors, vol. 18 (6), p. 1877, 8 June 2018.
[11]
Lidozzi, Alessandro, et al., “Towards LabVIEW and system on module for power electronics and drives control applications,” Proceedings of the IECON 2016-42nd Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2016.
[12]
Hasegawa, M., et al., “Development of plasma control system for divertor configuration on QUEST,” Fusion Engineering and Design, vol. 88 (6-8), pp. 1074-1077, 2013.
[13]
Kurihara, K., “A new shape reproduction method based on the Cauchy-condition surface for real-time tokamak reactor control,” Fusion engineering and design, vol. 51, pp. 1049 (8), 2000.
[14]
Nakamura, Kazuo, et al. "Characteristics of SVD in ST Plasma Shape Reproduction Method Based on CCS," Plasma Fusion Res., vol. 8, P. 1048, 2009.
[15]
K. Nakamura et al., “Shape reconstruction of RF-driven divertor plasma on QUEST,” IEEE Trans. Plasma Sci. vol. 42 (9), p. 2309, 2014.
Browse journals by subject